Bonjour,
J'ai une imprimante HP DesignJet 90 qui indique parfois le code erreur 01:13
Dans la doc ce code erreur n'existe pas pour la designjet 90.
Merci pour votre aide
0
DesignJet 90 code erreur 01:13
Débuté par MrFred, janv. 22 2011 09:31
1 réponse à ce sujet
#2
-
- PRO
-
- 571 messages
Expert
- Genre (*):Homme
Posté 23 janvier 2011 - 23:42
Salut, je n'ai pas le temps de t'aider... mais fait ta vie avec cette info..
bonne chance
Baudouin
System Error: 01:13
Problem
Description:
Electronics Module failure. The possible cause could be:
1. One of the ASIC’s in the Electronics Module is reporting that it is
too hot.
2. The interruptions from the Scan-Axis servo or from the Paper-
Axis servo are not coming as regularly as they are expected or
are coming too late.
Corrective Action: Try the following:
Switch the Printer Off and wait a few minutes. Switch the Printer
On again and check if the Error Code has disappeared.
If the Error Code continues, replace the Electronics Module
bonne chance
Baudouin
System Error: 01:13
Problem
Description:
Electronics Module failure. The possible cause could be:
1. One of the ASIC’s in the Electronics Module is reporting that it is
too hot.
2. The interruptions from the Scan-Axis servo or from the Paper-
Axis servo are not coming as regularly as they are expected or
are coming too late.
Corrective Action: Try the following:
Switch the Printer Off and wait a few minutes. Switch the Printer
On again and check if the Error Code has disappeared.
If the Error Code continues, replace the Electronics Module
